1500 lb capacity. Low Profile 100% of the Cargo Tray Length Slides Out for Total Access to your Cargo. Real plywood Deck with a TPO rubber laminated surface for strength and durability. 36 Industrial Cam Follower Needle and Ball Bearings provide Dependable Lasting support for the Cargo You Haul in Your CargoGlide. Powder Coated Industrial 4 in. high extruded 6061-T6 Thick Aluminum Side Rails with integrated Full Perimeter Tie-Down Tracks and 4 Infinitely Adjustable Eyebolt Tie-Downs to make securing cargo easy and versatile.Includes 8 in. High Side Extensions on the first four feet of the rails at the cab end, helps contain more cargo. The OUTSIDE dimensions for this unit are 41 in. long and 48.25 in. wide. The INSIDE Deck surface is 40 in. long and 47 in. wide. Total Deck Height is 4.75 in. Comes fully assembled for easy installation by 2 people.
When ordering the CG1500XL or the CG2200XL with a low profile deck, the installer must check the clearance between the middle frame rail and the tail gate. Some truck tail gates do not lay flat. They lay tilted up enough that will cause binding when the unit is fully extended. Please measure the angle of the tail gate before ordering. If the tailgate of your truck is NOT flat, then you have two options. One choice is to install “Tail Gate Drop Down Links” which we sell as an accessory. However some newer trucks do not allow for this modification. Please check your tailgate before ordering. The second choice is to install a “Spacer Kit” under the CG1000XL. The “Spacer Kit” will raise the unit high enough to clear a tail gate that does NOT lay perfectly flat. Please request a spacer kit from your dealer. If you order the CG1500XL or the CG2200XL with a standard height deck, then the tail gate is usually not an issue but we recommend checking the clearance between the middle frame rail and the tail gate in order to be sure of proper installation.